Times-7 – A5530 SlimLine™ RAIN (UHF) Ground Mat Antenna
The Times-7 A5530 is a high-performance UHF RFID ground mat antenna designed for tracking people, products, and equipment in dynamic environments. With its ultra-low profile (only 12 mm thick), robust IP66-rated construction, and load-bearing capacity, the A5530 is ideal for race timing, event check-ins, conference tracking, and industrial asset flow. The mat can be deployed in high-traffic areas including entrances and production lines without impeding movement or performance. It is available in multiple polarization types (circular, vertical linear, horizontal linear) to suit a variety of read scenarios, providing enhanced read reliability and flexibility.
Specification
Electrical Options:
-
Polarizations Available:
-
A5530C: Right-Hand Circular
-
A5530V: Vertical Linear
-
A5530H: Horizontal Linear
-
-
Frequency Range: 865–868 MHz (ETSI) / 902–928 MHz (FCC)
-
Far-Field Gain:
-
9.5 dBiC (circular)
-
10 dBi (linear)
-
-
3 dB Beamwidth:
-
A5530C: 85° (YZ), 13° (XZ)
-
A5530V: 70° (YZ), 25° (XZ)
-
A5530H: 85° (XZ), 13° (YZ)
-
-
VSWR: 1.8–2.5 (typical depending on model)
-
Front-to-Back Ratio: –18 to –20 dB
-
Nominal Impedance: 50 Ω
-
Max Input Power: 3 W
-
Anti-Static Protection: Yes, DC grounded
-
Antenna Detection: 10 kΩ resistance
Physical & Environmental:
-
Dimensions (Unboxed): 1220 x 600 x 12 mm (48.03” x 23.62” x 0.47”)
-
Boxed: 1337 x 690 x 40 mm
-
Weight:
-
Net: 8.1–8.7 kg depending on model
-
Gross: 9.5–10.1 kg
-
-
Radome Material: Molded polyurethane
-
Environmental Rating: IP66
-
Operating Temp: 0 °C to +50 °C
-
Storage Temp: –30 °C to +60 °C
-
Connector: SMA female fly lead (300 mm)
-
Load Bearing:
-
Max point load: 100 psi (7 kg/cm²)
-
Max distributed load: 500 kg / 1100 lbs
-
Benefits
With support for moderate loads from runners, bikes, and carts, the A5530 is trusted worldwide in race timing and event management—delivering accurate reads under pressure.
Available in circular, vertical linear, and horizontal linear polarization to optimize read directionality—adaptable to race timing, industrial tracking, and attendee monitoring alike.
Just 12 mm thick, the A5530 lies flush to the floor for minimal disruption while delivering high read performance. Ideal for entrances, walkways, and production lines.
Related Products
The ID PAD74-U is a compact and powerful USB pad reader designed for contactless data exchange with HF transponders. It features a defined capture window and a read range of up to 19 cm. With support for ISO 15693 and ISO 14443 transponders, it is suitable for applications like access control, user ID card detection, and book/document tracing in libraries and offices. The reader comes with 3 LEDs for optical feedback and is USB powered, making it easy to connect to a laptop or desktop PC.
- Dimensions: 240 mm x 180 mm x 13 mm (9.45 inch x 7.09 inch x 0.51 inch)
- Weight: approx. 0.5 kg (1.2 lbs)
- Housing: Insensitive surface with upper part made of plastic ABS and lower part made of plastic blade
- Color: Pad in black, upper part in similar RAL 9003 (white)
- Protection class: IP30
- Operating frequency: 13.56 MHz
- Max. transmitting power: 400 mW ±1 dB
- Supply voltage: 5V DC (via USB)
- Power consumption: max. 2.5 W
- Interfaces: USB 2.0
- Indicator, optical: 3 LEDs (green, red, blue)
- Supported transponders: ISO 15693, ISO 14443-A/B, (ISO 18000-3 MODE 1)*
- Reader modes: ISO Host Mode, Scan Mode**
- Temperature range: Operation:-25degree C up to +55degree C (-13F up to 131F), Storage:-25degree C up to +70degree C (-13F up to 158F)
- Relative air humidity: 5% up to 95% (non-condensing)
- Software development kits: Windows (C++, .NET, Java), LINUX (C++, Java), Raspberry Pi
- USB driver: Windows Server 2012 and 2016, Windows 10 and 11; 32/64 Bit
The ID RWA40.30-USB is a versatile desktop reader designed for contactless data exchange with common 125 kHz transponders. It is suitable for various office, administration, and industrial applications. With its USB interface, it allows for easy power supply and data exchange with a computer or other equipment. The reader has its own local intelligence, enabling both online and offline operation.
- Dimensions: 144 mm x 84 mm x 18 mm
- Weight: approximately 105 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- Operating frequency: 125 kHz
- MTBF: 500,000 h
- Supply voltage: 5 V, USB Bus powered
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: USB Full-Speed (12 MBit/s)
- Optical indicators: 2 LED (Green: Power and online/offline Blue: Transponder communication)
- Operation mode: Polling-Mode
- Supported transponders: 125 kHz Read Only transponders, 125 kHz Read / Write transponders
- USB CDC device driver: Windows 2000 SP4, Windows Server 2003, Windows XP SP2, Vista 32 Bit
- EEPROM: 512 Byte (1 x 106 write cycles)
- FLASH: 128 Byte (firmware update in application possible)
- Temperature range: Operation: -20 degree C up to +60 degree C, Storage: -40 degree C up to +85 degree C
- Relative air humidity: max. 95% (non-condensing)
The UHF Mid-Range Antenna ID ANT.U150/150 by FEIG ELECTRONIC GmbH is a robust, compact, and aesthetically pleasing antenna designed for a variety of demanding environments. With a circular polarization that ensures optimal performance and reliable read ranges up to 4 meters, this antenna is ideal for logistics, industrial applications, railway systems, waste management, and retail inventory tracking. Its IP68 protection class makes it suitable for permanent outdoor use, even in harsh industrial settings. The ID ANT.U150/150 features a VESA100 standard mounting for easy installation and is compatible with multiple FEIG UHF readers, making it a versatile solution for efficient asset tracking and inventory management.
- Dimensions: 151 mm x 150 mm x 14.5 mm
- Weight: 230 g
- Housing: ABS, UV resistant, and fire-retardant
- Protection Class: IP68
- Gain: Approximately 5 dBic
- 3 dB Beam Width: 105 x 105
- Polarization: Circular (RHCP)
- Antenna Connector: SMA (female)
- Operating Frequencies:
EU Variant: 865 Mz – 868 MHz
FCC Variant: 902 MHz – 928 MHz
The ID ANT340 / 240 HF Pad Antenna is an elegantly designed, high-performance antenna for contactless data exchange with HF transponders. Ideal for office and library applications, it provides up to a 30 cm read range for seamless file and document tracking. The antenna is built with a sleek, flat profile, making it a versatile choice for desktop use. It comes equipped with a 230 cm coaxial cable and SMA plug, ensuring easy integration with compatible readers. Available in both plastic housing and module form, this antenna offers flexibility for various applications in secure, contactless communication systems.
- Dimensions: 337 mm x 237 mm x 8 mm
- Weight: 530 g
- Material: Plastic ABS housing
- Color: Grey-white
- Protection Class: IP40
- Operating Frequency: 13.56 MHz
- Maximum Transmitting Power:2 W
- Antenna Connection: 1 x SMA plug (50 ohm)
- Cable Length: 230 cm RG58 coaxial cable
- Operating Temperature: 0degree C to +55degree C
- Storage Temperature: -25degree C to +85degree C
- Humidity Range: 5% to 95% (non-condensing)
- Compliance: EMC EN 301 489, Safety EN 62368-1, EN 50364
The ID ANT.U290/290 and ID ANT.U580/290 are robust UHF RFID antennas designed for optimized reading performance. With circular polarization, these antennas allow for the identification of transponders in different orientations, enabling 3-dimensional identification in gate applications. They are suitable for both indoor and outdoor use, with a high protection class IP67 rating. These antennas have a modern and elegant design, and they are available in different dimensions and colors. They have TNC connectors and VESA connection for easy installation. The ID ANT.U580/290 has a 30° beam width, making it particularly suitable for vehicle identification and Free Flow Tolling systems.
- Dimensions (ID ANT.U290/290): 288 mm x 288 mm x 65 mm
- Dimensions (ID ANT.U580/290): 576 mm x 288 mm x 80 mm
- Housing: PC / Aluminium
- Color: Anthracite, translucent
- Weight (ID ANT.U290/290): 1,550 g
- Weight (ID ANT.U580/290): 3,850 g
- Protection class: IP67
- Gain (ID ANT.U290/290): Approx. 9 dBic
- Gain (ID ANT.U580/290): Approx. 11 dBic
- 3 dB beam width (ID ANT.U290/290): 65 x 65
- 3 dB beam width (ID ANT.U580/290): 30 x 65
- Polarization: Circular
- Antenna connection: TNC socket (50 ohm)
- Temperature range (ID ANT.U290/290): -25 degree C up to +55 degree C
- Temperature range (ID ANT.U580/290): Not specified
- Storage temperature range (ID ANT.U290/290): -25 degree C up to +80 degree C
- Tolerances: ±0.5 mm
The ID ANT.MUX.M4 is a 4 channel Multiplexer Module designed for switching between RFID antennas operating at a frequency of 13.56 MHz. It allows multiple single antennas and gate solutions to be operated with just one reader. The Multiplexer is controlled via the antenna cable connected to the reader, making installation easy and hassle-free. With non-wearing electronic switches and high switching speed, this Multiplexer ensures efficient and reliable communication between the reader and antennas.
- Dimensions: 137 mm x 77 mm x 15 mm
- Weight: approximately 80 g
- Operating frequency: 13.56 MHz
- Supply voltage: 12 – 24 V DC
- Power consumption: maximum 4.0 W
- Attenuation per channel: maximum 0.5 dB
- Max. perm. switching power: 8 W
- RF connections: 1x input (SMA jack), 4x output (SMA jack)
- RF switches: electronic switches (non-wearing) with switching speed < 1 ms
- Triggering reader: communication via RF input 1
- Signal indicator: 1 x LED per channel, 3 x LED (Run / HF / Communication)
- Temperature range: Operation: -25 degree C to +65 degree C (-13 F to +149 F), Storage: -40 degree C to +80 degree C (-40 F to +176 F)
- Standard conformity: EMC (EN 61000-6-3, EN 61000-6-2), Vibration (EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g), Shock (EN 60068-2-27, Acceleration: 30 g)
