FEIG – ID LRMU4000 UHF Long Range Reader Module
The ID LRMU4000 is a powerful UHF reader module engineered for seamless integration into machines, control panels, and industrial systems. Offering up to 2W configurable RF power, four antenna ports, and onboard edge computing, it enables advanced long-range RFID applications without the need for external processing. Compact and rugged, the module includes industrial I/O support, secure key storage, and a Linux-based OS—making it ideal for use in automation, engineering, and custom-built RFID solutions.
Specification
-
Output Power: 100 mW to 2 W, configurable in 100 mW steps
-
Antenna Ports: 4 x MCX (50 Ohm), internal multiplexer
-
Interfaces: Ethernet (RJ45), RS485, USB OTG
-
I/O:
-
2 Optocoupler inputs
-
2 Optocoupler outputs
-
2 Relay outputs (1 A switching, 2 A continuous)
-
-
Power Supply: 12–24 V DC ±10%, PoE+
-
Computing: ARM Cortex-A7 + M4, 1 GB Flash, 512 MB RAM
-
Operating System: Embedded Linux
-
Reader Modes: Host, Buffered Read, Notification
-
Mounting: Includes aluminum plate for mounting and heat dissipation
-
Protection: RF diagnostics, antenna SWR monitoring, thermal control
-
Transponder Support: EPC Class1 Gen2, ISO 18000-63, ISO 29167
-
Operating Temp: –40 °C to +70 °C
-
Certifications: EN 302 208, FCC, IC RSS-247, EMC, Cybersecurity
Benefits
With no housing and multiple screw points, the LRMU4000 installs directly inside machines or panels, saving space while allowing flexible design.
Built-in computing and application hosting capabilities let you run custom logic locally—reducing latency and simplifying system architecture.
Full transponder support, secure key storage, and rugged inputs/outputs make this reader ideal for long-term industrial deployment.
Related Products
The ID RWA40.30-USB is a versatile desktop reader designed for contactless data exchange with common 125 kHz transponders. It is suitable for various office, administration, and industrial applications. With its USB interface, it allows for easy power supply and data exchange with a computer or other equipment. The reader has its own local intelligence, enabling both online and offline operation.
- Dimensions: 144 mm x 84 mm x 18 mm
- Weight: approximately 105 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- Operating frequency: 125 kHz
- MTBF: 500,000 h
- Supply voltage: 5 V, USB Bus powered
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: USB Full-Speed (12 MBit/s)
- Optical indicators: 2 LED (Green: Power and online/offline Blue: Transponder communication)
- Operation mode: Polling-Mode
- Supported transponders: 125 kHz Read Only transponders, 125 kHz Read / Write transponders
- USB CDC device driver: Windows 2000 SP4, Windows Server 2003, Windows XP SP2, Vista 32 Bit
- EEPROM: 512 Byte (1 x 106 write cycles)
- FLASH: 128 Byte (firmware update in application possible)
- Temperature range: Operation: -20 degree C up to +60 degree C, Storage: -40 degree C up to +85 degree C
- Relative air humidity: max. 95% (non-condensing)
The ID CPR40.30-A is a versatile desktop reader designed for contactless data exchange with common transponders according to ISO14443-A and ISO14443-B, as well as NFC devices according to ISO 18092. It is ideal for various desktop applications such as eTicketing, eDocument, loyalty cards, and public transport. With its “SoftCrypto” and “SAMCrypto high level” functions, it provides a comfortable and fast interface for accessing encrypted data of mifare DESFire EV1, mifare PLUS, and mifare Ultralight C.
- Dimensions (w x h x d): 144 mm x 84 mm x 18 mm
- Weight: approx. 260 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- RFID Interface: ISO 14443-A/-B (106 – 848 kBit/s)
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW
- MTBF: 500,000 h
- Supply voltage: 5 V DC ± 10 % ripple
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: RS232 (4,800 up to 230,400 Baud)
- Indicators, optical: 2 LED (green / blue)
- Contact interface: ISO 7816
- Operation modes: Polling-Mode, Scan-Mode
- Supported transponders: mifare classic, mifare UltraLight, mifare DESFire, mifare PLUS, mifare UltraLight C, my-d move, JewelTM, FeliCa, NTAG, mifare/NTAG Ev2 Crypto, NFC Devices in Card Emulation Mode (Tag Type 1 … 4)
- Software Development Kits: Windows (C++, .NET, Java), LINUX (C++, Java), Raspberry Pi
- USB driver, PC/SC driver: Windows Server 2012 and 2016, Windows 7, 8 and 10; 32 / 64 Bit
- Temperature range:
- Operation:-20 degree C up to +60 degree C
2. Storage:-40degree C up to +85 degree C - Relative air humidity: max. 95% (non-condensing)
- Standard conformity:
- Radio license: Europe – EN 300 330
2. EMC: EN 301 489
3. Safety & Health: EN 60950, EN 50364
4. Environment: RoHS-2002/95/EC, WEEE-2002/96/EC - Order descriptions: ID CPR40.30-A – Desktop Reader RS232
- Scope of delivery: ID CPR40.30-A, 2.5 m cable (permanently mounted) for power supply (5.5 mm coaxial connector) and interface (9-pin D-Sub connector), Installation manual
The ID RWA40.30-USB is a versatile desktop reader designed for contactless data exchange with common 125 kHz transponders. It is suitable for various office, administration, and industrial applications. With its USB interface, it allows for easy power supply and data exchange with a computer or other equipment. The reader has its own local intelligence, enabling both online and offline operation.
- Dimensions: 144 mm x 84 mm x 18 mm
- Weight: approximately 105 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- Operating frequency: 125 kHz
- MTBF: 500,000 h
- Supply voltage: 5 V, USB Bus powered
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: USB Full-Speed (12 MBit/s)
- Optical indicators: 2 LED (Green: Power and online/offline Blue: Transponder communication)
- Operation mode: Polling-Mode
- Supported transponders: 125 kHz Read Only transponders, 125 kHz Read / Write transponders
- USB CDC device driver: Windows 2000 SP4, Windows Server 2003, Windows XP SP2, Vista 32 Bit
- EEPROM: 512 Byte (1 x 106 write cycles)
- FLASH: 128 Byte (firmware update in application possible)
- Temperature range: Operation: -20 degree C up to +60 degree C, Storage: -40 degree C up to +85 degree C
- Relative air humidity: max. 95% (non-condensing)
The ID ANT.U290/290 and ID ANT.U580/290 are robust UHF RFID antennas designed for optimized reading performance. With circular polarization, these antennas allow for the identification of transponders in different orientations, enabling 3-dimensional identification in gate applications. They are suitable for both indoor and outdoor use, with a high protection class IP67 rating. These antennas have a modern and elegant design, and they are available in different dimensions and colors. They have TNC connectors and VESA connection for easy installation. The ID ANT.U580/290 has a 30° beam width, making it particularly suitable for vehicle identification and Free Flow Tolling systems.
- Dimensions (ID ANT.U290/290): 288 mm x 288 mm x 65 mm
- Dimensions (ID ANT.U580/290): 576 mm x 288 mm x 80 mm
- Housing: PC / Aluminium
- Color: Anthracite, translucent
- Weight (ID ANT.U290/290): 1,550 g
- Weight (ID ANT.U580/290): 3,850 g
- Protection class: IP67
- Gain (ID ANT.U290/290): Approx. 9 dBic
- Gain (ID ANT.U580/290): Approx. 11 dBic
- 3 dB beam width (ID ANT.U290/290): 65 x 65
- 3 dB beam width (ID ANT.U580/290): 30 x 65
- Polarization: Circular
- Antenna connection: TNC socket (50 ohm)
- Temperature range (ID ANT.U290/290): -25 degree C up to +55 degree C
- Temperature range (ID ANT.U580/290): Not specified
- Storage temperature range (ID ANT.U290/290): -25 degree C up to +80 degree C
- Tolerances: ±0.5 mm
The ID MAT Manual Antenna Tuner is a versatile and reliable device designed for manual tuning and retuning of HF Long Range Antennas operating at a frequency of 13.56 MHz. It allows for easy construction of customized single antennas using different sizes and shapes of antenna conductors such as aluminium bands or copper pipes. With individually switchable capacitors, the antenna can be tuned to its environment, ensuring optimal performance. The ID MAT.S-A variant also features an electronic switch to disconnect the antenna circuit, preventing coupling effects in complex antenna arrangements.
- Dimensions (w x h x d):
- ID MAT-B: 90 mm x 45 mm x 17 mm
2. ID MAT.S-A: 90 mm x 45 mm x 19 mm - Weight: approximately 35 g
- Operating frequency: 13.56 MHz
- Antenna conductor: Double-sided solder surface with hole for screw attachment (M3)
- Transmitting power: maximum 8 W
- Reader connection: SMA HF socket RG58
- Impedance: 50 ohm
- Tuning range inductivity: 0.6 – 2.3 microH
- Quality: 10 – 50
- Temperature range:
- Operation: -25 degree C up to +55 degree C
- Storage: -25 degree C up to +60 degree C
- Standard conformity:
- Vibration: EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g
2. Shock: EN 60068-2-27, Acceleration: 30 g
The ID ANT.MUX is an HF 8 channel Multiplexer that allows for the operation of up to 8 antennas with just one reader. It facilitates communication between the reader and the multiplexer via an antenna cable. The outputs of the multiplexer can be controlled by the reader, a host, or digital inputs. It features non-wearing electronic switching of the outputs and has a high switching rate of less than 1 ms. The multiplexer is available in a housing or as a module, with options for 8 channel or 4 channel configurations.
- Dimensions (w x h x d): 182 x 110 x 90 mm
- Weight: approximately 550 g
- Housing: Plastic ASA, with screwed plexiglas lid
- Protection class: IP65
- Operating frequency: 13.56 MHz
- Grommet: 12 x screwed cable gland M16 x 5
- Supply voltage: 12 – 24 V DC
- Power consumption: maximum 4.0 W
- Attenuation per channel: maximum 0.5 dB
- Max. perm. switching power: 8 W
- RF connections: 2x input (SMA jack), 8x output (SMA jack)
- RF switch: electronic switch with switching speed less than 1 ms
- Triggering: Reader via RF input 1, external pulse generator via digital input
- Digital inputs: 1x optocoupler (max. 24 V DC / 20 mA)
- Signal indicators: 1 x LED per channel, 3 x LED (Run / HF / Communication)
- Temperature range: Operation: -25 degree C up to +65 degree C, Storage: -40 degree C up to +80 degree C
- Standard conformity: EMC (EN 61000-6-3, EN 61000-6-2), Vibration (EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g), Shock (EN 60068-2-27, Acceleration: 30 g)
