FEIG – ID ISC.LR.WS-A
The Wiegand Switch ID ISC.LR.WS-A is a cost-effective and compact solution for multilane vehicle access control installations. With just one UHF reader, it allows for the control of two independent lanes, providing reliable access control and clear cost advantages.
Specification
- Dimensions (w x h x d): 99 mm x 90 mm x 22.5 mm
- Weight: approx. 90 g
- Housing: Polyamide
- Color: RAL7035 (light grey)
- Power supply: 12 up to 24 V DC ±20%
- Power consumption: typ. < 2 W
- Supported readers: ID LRU1002, ID LRU500i-BD (further readers on request)
- Indicator: 2 green LED indicate the active Wiegand output
- Other features: Housing for DIN Rail Mounting, Signal improvement in case of communication problems between Access Control Panel and Reader
- Temperature range: Operation:-25 degree C up to +55 degree C, Storage:-40 degree C up to +85 degree C
- Humidity: 5% up to 95% (non-condensing)
- Vibration: EN 60068-2-6 10 Hz up to 150 Hz: 0.075 mm/1 g
- Shock: EN 60068-2-27 Acceleration: 30 g
- EMC: EN 301 489
- Safety: EN 62 368
Benefits
The Wiegand Switch allows for the control of two lanes with just one reader, providing clear cost advantages for multilane vehicle access control installations.
The compact housing of the Wiegand Switch is designed for DIN rail mounting, making it quick and easy to install.
With automatic signal improvement in case of communication problems between the access control panel and reader, the Wiegand Switch ensures reliable access control for two independent lanes.
Related Products
The ID PRH101-USB HF Handheld Reader is a versatile device designed for contactless data exchange with ISO 15693 transponders. It offers variable interfaces, including USB, and has an anti-collision function. With a read range of up to 20 cm, it is suitable for various applications in retail, logistics, and industry.
- Dimensions: 230 mm x 100 mm x 80 mm
- Weight: 320 g (without batteries)
- Housing: Plastic ABS
- Color: RAL 9002 / RAL 7044
- Protection class: IP30
- Operating frequency: 13.56 MHz
- Transmitting power: 0.5 W ± 2 dB
- Supply voltage:
- ID PRH102-B: 4 Mignon cells2-1.5 V AA
- ID PRH101-USB: USB high powered interface
- Current consumption: max. 0.5 A
- Power consumption: max. 2.5 VA
- Antenna: integrated
- Interfaces:
- ID PRH102-B: Bluetooth (Serial port profile)
- ID PRH101-USB: USB (12 Mbit)
- Address setting for interface:
- ID PRH102-B: Bluetooth MAC address
- ID PRH101-USB: Device-ID of the reader
- Indicators, optical: 1 LED (multicolored)
- Indicators, acoustic: buzzer
- Supported transponders: ISO 15693 (ISO 18000-3 MODE 1)*
- Protocol modes: ISO Host Mode, Scan Mode
- Temperature range:
- Operation: 0 degree C up to +50 degree C
- Storage:-20 degree C up to +70 degree C
- Relative air humidity: 5 % up to 95 % (not condensing)
The ECCO+ is a compact and robust barcode/RFID scanner that combines advanced AutoID technology. It can read 1D and 2D barcodes and also identify (read and write) RFID tags (HF or UHF). With its versatile communication interfaces and adaptable software, it can be used in various fields such as transport and logistics, asset tracking, healthcare, E-Ticketing, and time recording.
- Dimensions: 87 mm x 48 mm x 26 mm
- Weight: 95 g (3.35 oz) to 105 g (3.7 oz)
- Housing: Double-walled with robust ABS inside and protective rubber coating outside
- Battery: 1300 mAh Lithium Polymer battery; 3.7 V
- CPU: ARM9, 400 MHz
- Memory: 128 MB RAM, 1 GB Flash (500 MB internal / 500 MB external)
- Interfaces: USB Mass storage / USB HID / USB Ethernet / USB Serial
- Programming: ECLIPSE IDE for C / C++
- Supported OS: Win 7 / Win 8 / Win 10 (32 and 64 bit) / Server 2003 / 2000
- Wireless interface: Bluetooth Class 2, HiD SPP, WiFi 802.11b/g
- Barcode options: 1D Laser module (EAN-8, EAN-13, UPC-A, UPC-E, Code 128, Code 39, Code 93, Interleaved 2of5, Chinese 2of5, Codabar, Codablock_F), 2D Imager (DataMatrix, QR Code, Micro QR, Aztec Code, Maxi Code, PDF417, MicroPDF)
- RFID options: HF (13.56 MHz ISO14443 / 15693), UHF (860 – 930 MHz, EPC GEN2, ISO18000-6C)
- Sealing: IP64
- Drop: specification:6 m on concrete surface
- Temperature range: Operation: 0 degree C up to +50 degree C, Storage:-20 degree C up to +60 degree C
- Humidity: 5 % up to 95 % (non-condensing storage)
- Certificates: RoHS, WEEE, CE, FCC
The ID RWA40.30-USB is a versatile desktop reader designed for contactless data exchange with common 125 kHz transponders. It is suitable for various office, administration, and industrial applications. With its USB interface, it allows for easy power supply and data exchange with a computer or other equipment. The reader has its own local intelligence, enabling both online and offline operation.
- Dimensions: 144 mm x 84 mm x 18 mm
- Weight: approximately 105 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- Operating frequency: 125 kHz
- MTBF: 500,000 h
- Supply voltage: 5 V, USB Bus powered
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: USB Full-Speed (12 MBit/s)
- Optical indicators: 2 LED (Green: Power and online/offline Blue: Transponder communication)
- Operation mode: Polling-Mode
- Supported transponders: 125 kHz Read Only transponders, 125 kHz Read / Write transponders
- USB CDC device driver: Windows 2000 SP4, Windows Server 2003, Windows XP SP2, Vista 32 Bit
- EEPROM: 512 Byte (1 x 106 write cycles)
- FLASH: 128 Byte (firmware update in application possible)
- Temperature range: Operation: -20 degree C up to +60 degree C, Storage: -40 degree C up to +85 degree C
- Relative air humidity: max. 95% (non-condensing)
The ID MRU102-A / -USB is a compact and versatile UHF Universal Reader designed for short to medium read ranges. It features a small form factor with an internal antenna, but can also be connected to up to three external antennas for extended read ranges of up to 4 meters. With variable interfaces (RS232, USB), it can be easily integrated into existing systems. This reader supports the Low Level Reader Protocol (LLRP) and is suitable for a wide range of applications in various industries.
- Dimensions: 145 mm x 87 mm x 27 mm
- Power supply: 12 to 24 V DC, Power over Ethernet (PoE)
- Power consumption: max. 7 W
- Operating frequencies: EU (865 MHz to 868 MHz), FCC (902 MHz to 928 MHz)
- Output power: 50 mW to 500 mW, configurable
- Antenna connection: 3 x SMA plug (50 ohm), 1x internal antenna
- Interfaces: RS232 (-A) / USB Full Speed (-USB) / Ethernet (-PoE)
- Reader modes: ISO Host Mode, Buffered Read Mode, Scan Mode (-A and -USB), Notification Mode (-PoE)
- Supported transponders: EPC Class1 Gen2, ISO 18000-6-C
- Temperature range: Operation: -25 degree C up to +55 degree C, -25 degree C up to +45 degree C (PoE); Storage: -25 degree C up to +70 degree C
- Relative humidity: 5 % up to 95 % (non-condensing)
The ID CPR40.30-A is a versatile desktop reader designed for contactless data exchange with common transponders according to ISO14443-A and ISO14443-B, as well as NFC devices according to ISO 18092. It is ideal for various desktop applications such as eTicketing, eDocument, loyalty cards, and public transport. With its “SoftCrypto” and “SAMCrypto high level” functions, it provides a comfortable and fast interface for accessing encrypted data of mifare DESFire EV1, mifare PLUS, and mifare Ultralight C.
- Dimensions (w x h x d): 144 mm x 84 mm x 18 mm
- Weight: approx. 260 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- RFID Interface: ISO 14443-A/-B (106 – 848 kBit/s)
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW
- MTBF: 500,000 h
- Supply voltage: 5 V DC ± 10 % ripple
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: RS232 (4,800 up to 230,400 Baud)
- Indicators, optical: 2 LED (green / blue)
- Contact interface: ISO 7816
- Operation modes: Polling-Mode, Scan-Mode
- Supported transponders: mifare classic, mifare UltraLight, mifare DESFire, mifare PLUS, mifare UltraLight C, my-d move, JewelTM, FeliCa, NTAG, mifare/NTAG Ev2 Crypto, NFC Devices in Card Emulation Mode (Tag Type 1 … 4)
- Software Development Kits: Windows (C++, .NET, Java), LINUX (C++, Java), Raspberry Pi
- USB driver, PC/SC driver: Windows Server 2012 and 2016, Windows 7, 8 and 10; 32 / 64 Bit
- Temperature range:
- Operation:-20 degree C up to +60 degree C
2. Storage:-40degree C up to +85 degree C - Relative air humidity: max. 95% (non-condensing)
- Standard conformity:
- Radio license: Europe – EN 300 330
2. EMC: EN 301 489
3. Safety & Health: EN 60950, EN 50364
4. Environment: RoHS-2002/95/EC, WEEE-2002/96/EC - Order descriptions: ID CPR40.30-A – Desktop Reader RS232
- Scope of delivery: ID CPR40.30-A, 2.5 m cable (permanently mounted) for power supply (5.5 mm coaxial connector) and interface (9-pin D-Sub connector), Installation manual
AT907 is a versatile and reliable device that is developed in combination with the needs of IOT application scenarios. It compact in size and has a long battery life, and high-performance antenna. It equipped with a variety of software and connectivity options, allowing it to be easily integrated with existing systems and workflows. The AT907 by ATID stands as a pinnacle in RFID technology, designed to elevate your tracking and identification processes to unprecedented levels of efficiency and accuracy. This handheld RFID reader empowers businesses across diverse sectors with its advanced capabilities and user-friendly interface. With its compact yet robust design, the AT907 is your indispensable tool for streamlined operations and enhanced productivity.
