TSL – 2166 Bluetooth® Rugged UHF RFID Reader with ePop-Loq®
The new TSL 2166 Bluetooth® Rugged UHF RFID reader provides high performance UHF RFID reading in a tough and rugged form factor. The 2166 UHF RFID Reader features the new TSL® ePop-Loq® connector.
The ePop-Loq® system allows data and charge connections to be passed from the reader to an attached device, such as a smartphone or handheld terminal.
It also safely separate when the reader is subject to large impacts, such as when dropped.
The reader is highly resistant to water, dust and mechanical trauma. A high capacity battery enables non-stop operation of the reader over the full working day. Designed to read and write to EPC Class 1 Gen 2 (ISO18000-6C) tags, the 2166 can also be configured with class leading high performance 2D data scanning to bring unparalleled data collection capabilities to any host it is connected to.
|Physical and Environmental Characteristics|
|Dimensions:||178.7 x 107.3 x 173.1 mm (LxWxH).|
|Weight:||865 g / 30.5 oz (including battery).|
|User input:||Single stage trigger.|
|User feedback:||Speaker, vibration motor, LEDs.|
|Power:||Rechargeable Lithium Ion removeable battery pack (11.25V, 2950mAh, 33.2Wh).|
|Minimum operating time1:||
|Input Rating:||15.0Vdc, 4.34A.|
|Enclosure materials:||Polycarbonate and TPU.|
|RFID engine:||TSL® custom module with embedded Impinj R2000.|
|Communication protocols:||TSL® ASCII 2.0 parameterised command set.|
|Memory:||Embedded 16GB* NAND storage card – store up to 250 million date and time
* For units manufactured in August 2020 onwards. Units sold before this time will have 8GB of storage.
|Compatible Host devices (Bluetooth®):||Any Bluetooth® Host5 supporting the Serial Port Profile (SPP) or Human Interface Device (HID) profile (Android, iOS, Linux, Mac, Windows). Comparison of Bluetooth® modes for TSL® UHF Readers.|
|Compatible Host devices (USB):||Any USB host with FTDI VCP driver support (Windows, Linux, Mac, Android).|
|Operating Temp.:||-10°C to 55°C (14°F to 131°F).|
|Charging Temp.:||5°C to 40°C (41°F to 104°F).|
|Storage Temp.:||Less than 1 month at at -20 to +60°C (-4°F to 140°F).
Less than 3 months at -20°C to +45°C (-4°F to 113°F).
Less than 1 year at -20°C to +20°C (-4°F to 68°F).
|Humidity:||5% to 85% non-condensing.|
|Tumble:||1500 0.5 metre tumbles at room temperature
|Electrostatic Discharge (ESD):||± 15kVdc air discharge; ± 8kVdc contact discharge.|
|MIL-STD 810F:||Meets and exceeds applicable MIL-STD
810F for drop, tumble and sealing.
|Standards supported:||EPC Class 1 Gen 2 and EPC C1G2 (TBD).|
|Nominal read range6:||Up to 9 m (29.5 ft).|
|Nominal write range6:||Up to 4 m (13.1 ft).|
|Field:||110-degree forward facing (approx.) measured from front of device.|
|Frequency Range:||EU: 865-868MHz; US: 902-928MHz.|
|Maximum Output Power:||Up to 30 dBm (region dependent)
+ 4.0 dBiC Antenna.
|*Please note; that this IP rating only applies to units with serials numbers ending in -000800 or higher|
|Optional 2D Barcode Engine:||Optional TSL® custom 2D Barcode Scan Engine module.|
|Sensor Resolution:||1280 x 960 pixels.|
|Field of View:||Horizontal: 48°, Vertical: 36.7°.|
|Focal Distance:||From front of engine: 7.38 in (187.5 mm).|
|Aiming LED (VLD):||655 nm Laser.|
|Illumination:||2X Warm white LEDs.|
|Symbologies Supported:||1D: All major codes
2D: PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX).
|Bluetooth®:||Bluetooth® Version 4.2.|
|Bluetooth® Frequency Range:||2.4 – 2.4835 GHz.|
|Bluetooth® Profiles:||SPP Profile, HID Profile, Apple iAP2, Bluetooth® Low Energy.|
|Bluetooth® Range7:||Up to 100m.|
|Bluetooth® Pairing:||Simple Secure Pairing, NFC OOB Pairing.|
|Direct USB||Connection via ePop-Loq® cases (separate purchase).|