UHF Seal Tag

Seal Tag eTamper are easily affixed by closing the robust wire loop through an opening similar to securing a padlock.

Once attached to an item, the wire loop is closed to make the tag operational. To remove a tag, the loop must be broken, rendering the tag permanently unreadable.

  • Length: 0.91 in (23.3 mm) + Seal wire 2.5 in (65 mm)
  • Width: 0.69 in (17.5 mm)
  • Height: 0.13 in (3.3 mm)
  • Weight: 0.04 oz. (1 g)
  • Affixes to: Any material (typically hanging in free air)
  • Mounting Method: Hang by closing the seal wire
  • Color: White
  • Housing Material: Polycarbonate (PC)
  • Chip Type: ICODE SLIx
  • Memory: 1024 bit EEPROM (896 bit user memory)
  • Operating Frequency: 13.56 MHz
  • Standards: ISO/IEC 15693, ISO/IEC 18000-3 Mode 1, NFC Forum Type 5(if NDEF formatted)
  • Vibration: IEC 68.2.6 (10g, 10…2000Hz, 3 axis, 2.5h)
  • Shock: IEC 68.2.29 (40g, 18ms, 6 axis, 2000 times)
  • Pull Force: 10 N minimum (connector should not go out)
  • Storage Temperature: -40° to +194° F (-40° to +90° C), 1000 h
  • Operating Temperature: -40° to +185° F (-40° to +85° C)
  • Shock/Fatigue: -40° to +194° F (-40° to +90° C), 100 × 5 min with 30 sec transition
Contact our industry certified support team today Make A Request
© 2019 RFID Canada.